LED Projects

The 2024 Christmas card

December 20, 2024

3D Printing Projects, LED Projects, Projects

Merry Christmas! Making the 2024 Christmas Card: A New Look, Same Core As the festive season approaches, it’s time for another dive into the making of our annual Christmas card here at Norwegian Creations. This year, we’re excited to share…

The 2023 Christmas card

December 22, 2023

Ragnar Ranøyen Homb

3D Printing Projects, LED Projects

Merry Christmas! A new unique Christmas Card is born! This year, as earlier years, we have made a PCB card with a MCU and shiny LEDs to assist with the holiday spirit creation =) Appearance As you probably have understood…

The 2022 Christmas Card

December 22, 2022

Ragnar Ranøyen Homb

3D Printing Projects, LED Projects

Merry Christmas! A new unique Christmas Card is born. This year, as earlier years, we have made a PCB card with a MCU and shiny LEDs to assist with the holiday spirit creation ? Appearance Each year they have a…

The 2021 Christmas Card

December 22, 2021

Ragnar Ranøyen Homb

3D Printing Projects, LED Projects

Happy Holidays! Is that time of the year again, and a new Christmas Card is born. As earlier years we have made a PCB card and programmed it to assist with the holiday spirit creation 🙂 Appearance Each year they…

The 2020 Christmas Card

December 18, 2020

Ragnar Ranøyen Homb

3D Printing Projects, LED Projects

Happy Holidays! Is that time of the year again, and a new Christmas Card is born. As previous years we have utilized our day-to-day skills, and made a PCB card. You can see more what we do and deliver on…

The 2019 Christmas Card

December 6, 2019

Ragnar Ranøyen Homb

3D Printing Projects, LED Projects

Ho ho ho! Is that time of the year again, and we have made a new Christmas Card. As you might see, the Card is rather influenced by our services and what we have made previous years. Electronics The Schematic are…

LED Matrix with Rolling Particles – Technical Insights and Finishing Touches

December 14, 2018

Ragnar Ranøyen Homb

3D Printing Projects, LED Projects, Teensy Projects

In our latest blog post we wrote about the enclosure on this “LED Matrix with Rolling Particles”. But how is it to use? And what happens on the inside? Continue to read this post to find out! What Does It…

LED Matrix with Rolling Particles – Overview and Enclosure

December 6, 2018

Mads Aasvik

3D Printing Projects, LED Projects, Teensy Projects

Making a device with an LED matrix is something we have wanted to do for a while now, and now we’ve finally gotten around doing it. The way we usually do it with these kinds of quick-builds is to use…

The 2018 Christmas Card

November 29, 2018

Ragnar Ranøyen Homb

3D Printing Projects, LED Projects

Last year we made a Christmas card heavily influenced by our fields of expertise and what we deliver. This year was no exception! What’s new this year, among other things, is the different design, and that there exists several variants…

Remotely Controlled LED Helmets

February 22, 2018

Ragnar Ranøyen Homb

LED Projects

A few months ago we were approached by NRK (Norwegian Broadcasting Corporation) with a request to create some cool stunts for the annually televised radio show called P3aksjonen. We started brainstorming around several ideas together with NRK. With a short…

This Year’s NC Christmas Card

December 22, 2017

Mads Aasvik

3D Printing Projects, LED Projects

Christmas is approaching fast and every year we like to get creative with our Christmas cards to Norwegian Creations’ clients, partners, friends and family. This year we decided to do something fresh and physical with our Christmas card routine. A…

Behind the scenes: “Blåfrost 2016”

March 22, 2017

Ragnar Ranøyen Homb

Arduino Projects, LED Projects

This is a behind the scenes post from something quite technically manageable, and at the same time visually very powerful! The case is an interactive installation that turns on the lights and starts up the internal smoke machine whenever…

A Button Pressing Game

September 14, 2016

Ragnar Ranøyen Homb

LED Projects, Teensy Projects, Woodworking Projects

In cooperation with Superblaise we did a project called “Hele Norges Knapp” (“All of Norway’s Button”) for BankAxept. The goal of the game was to press a button as many times as possible within 30 seconds. During its trip through…

Pattern Generation Code for Our Interactive LED Lamp

March 18, 2016

Mads Aasvik

LED Projects, Raspberry Pi Projects

When the lamp we built a while back got some attention on Hackaday recently, someone in the comments would’ve liked to see the code that generated the light patterns. We thought it could be cool to publish the code, so…

More light! Embedded-desk here we come

January 27, 2016

Gunnar Ranøyen Homb

LED Projects

In this post we explain what we did to light up our “embedded”-desk. As everything, it started with a need for light. And not a small amount. Enough to work well. Enough to see what you are doing. Enough to do what…

LED Projects

Categories