Teensy Projects

LED Matrix with Rolling Particles – Technical Insights and Finishing Touches

December 14, 2018

3D Printing Projects, LED Projects, Teensy Projects

In our latest blog post we wrote about the enclosure on this “LED Matrix with Rolling Particles”. But how is it to use? And what happens on the inside? Continue to read this post to find out! What Does It…

LED Matrix with Rolling Particles – Overview and Enclosure

December 6, 2018

Mads Aasvik

3D Printing Projects, LED Projects, Teensy Projects

Making a device with an LED matrix is something we have wanted to do for a while now, and now we’ve finally gotten around doing it. The way we usually do it with these kinds of quick-builds is to use…

Building a Remotely Controlled / Autonomous Land Vehicle Platform – pt. 3: Electronics and Remote Control Firmware

September 19, 2018

Mads Aasvik

Mechatronics, Teensy Projects

Previous parts in this series: Parts and Design Chassis Building In this post we’ll look at the electronics and the code and libraries used to control the vehicle. Motherboard PCB To tie the motorcontrollers, Teensy and receiver together, we chose…

Building a Remotely Controlled/Autonomous Land Vehicle Platform – pt. 2: Chassis Building

June 14, 2018

Mads Aasvik

3D Printing Projects, Mechatronics, Teensy Projects

About three months ago we wrote a post about a vehicle platform we’re building. Since then we’ve mostly waited for parts, primarily the aluminium plates. Now that the parts have arrived, we’ve started building the vehicle chassis. Current State The…

Focus Box part 3 – Packaging and Summary

October 26, 2016

Ragnar Ranøyen Homb

3D Printing Projects, Teensy Projects

This blog post series is about the creation of the “Focus Box”. A box that creates “noisy ambient sounds” to mask out background noise to enhance personal productivity. In the first blog post you can read more about the “big idea”. And…

Focus Box part 2: The Internals

October 4, 2016

Ragnar Ranøyen Homb

3D Printing Projects, Teensy Projects

In this post we will go through the inner workings of the Focus Box. What is creating the magic? You can read more about the background for this project in the blog post found here. The Goal of the Internals The job…

A Button Pressing Game

September 14, 2016

Ragnar Ranøyen Homb

LED Projects, Teensy Projects, Woodworking Projects

In cooperation with Superblaise we did a project called “Hele Norges Knapp” (“All of Norway’s Button”) for BankAxept. The goal of the game was to press a button as many times as possible within 30 seconds. During its trip through…

Focus Box part 1: The Idea

July 22, 2016

Ragnar Ranøyen Homb

3D Printing Projects, Teensy Projects

After looking into the music history of one of our makers we found an interesting fact: He often listens to ambient noise to achieve greater productivity and to easier get into the “zone” Why? We wondered if it was just he…

Teensy Projects

Categories