3D Printing Projects

Merry Christmas! A new unique Christmas Card is born! This year, as earlier years, we have made a PCB card with a MCU and shiny LEDs to assist with the holiday spirit creation =) Appearance As you probably have understood…

The 2022 Christmas Card

December 22, 2022

Merry Christmas! A new unique Christmas Card is born. This year, as earlier years, we have made a PCB card with a MCU and shiny LEDs to assist with the holiday spirit creation ? Appearance Each year they have a…

The 2021 Christmas Card

December 22, 2021

Happy Holidays! Is that time of the year again, and a new Christmas Card is born. As earlier years we have made a PCB card and programmed it to assist with the holiday spirit creation 🙂 Appearance Each year they…

The 2020 Christmas Card

December 18, 2020

Happy Holidays! Is that time of the year again, and a new Christmas Card is born. As previous years we have utilized our day-to-day skills, and made a PCB card. You can see more what we do and deliver on…

3D-printing and finishing

January 7, 2020

3D Printing Projects, Maker Tutorials

When 3D-printing, you typically get visible layers. These irregularities is often desirable to hide. In this post will show you a method you can use to conceal them and finish the part. The Subject and the Plan The model used…

The 2019 Christmas Card

December 6, 2019

Ho ho ho! Is that time of the year again, and we have made a new Christmas Card. As you might see, the Card is rather influenced by our services and what we have made previous years. Electronics The Schematic are…

How to go from an irregular form to a technical illustration

November 21, 2019

3D Printing Projects, Maker Tutorials, Misc. Other Projects

A common challenge is how you can go from a free hand drawing to a more technical correct illustration. In this blog post we are going to show you a process you can use to go from a simple hand…

LED Matrix with Rolling Particles – Technical Insights and Finishing Touches

December 14, 2018

3D Printing Projects, LED Projects, Teensy Projects

In our latest blog post we wrote about the enclosure on this “LED Matrix with Rolling Particles”. But how is it to use? And what happens on the inside? Continue to read this post to find out! What Does It…

LED Matrix with Rolling Particles – Overview and Enclosure

December 6, 2018

3D Printing Projects, LED Projects, Teensy Projects

Making a device with an LED matrix is something we have wanted to do for a while now, and now we’ve finally gotten around doing it. The way we usually do it with these kinds of quick-builds is to use…

The 2018 Christmas Card

November 29, 2018

Last year we made a Christmas card heavily influenced by our fields of expertise and what we deliver. This year was no exception! What’s new this year, among other things, is the different design, and that there exists several variants…

Making a Casing for an Embedded System Space Invaders Game

September 12, 2018

3D Printing Projects

A few months ago we wrote a blog post about a course in embedded systems for beginners where the goal was to make Space Invaders on an embedded system. We thought it would be fun to create a casing for…

The Automatic Pet Feeder

July 4, 2018

3D Printing Projects, Arduino Projects, Mechatronics

Many pet feeders already exist, but we wanted to make one ourselves. The author of this blog post has a dog with separation anxiety which makes it difficult for him to be left alone in the house. A small machine…

Building a Remotely Controlled/Autonomous Land Vehicle Platform – pt. 2: Chassis Building

June 14, 2018

3D Printing Projects, Mechatronics, Teensy Projects

About three months ago we wrote a post about a vehicle platform we’re building. Since then we’ve mostly waited for parts, primarily the aluminium plates. Now that the parts have arrived, we’ve started building the vehicle chassis. Current State The…

Logging Vibrations on Our 3D Printer Desk

February 8, 2018